Mount Rushmore

Mount Rushmore National Memorial is centered around a sculpture carved into the granite face of Mount Rushmore in the Black Hills in Keystone, South Dakota. Sculptor Gutzon Borglumcreated the sculpture’s design and oversaw the project’s execution from 1927 to 1941 with the help of his son Lincoln Borglum. The sculptures feature the 60-foot (18 m) heads of Presidents George Washington (1732–1799), Thomas Jefferson (1743–1826), Theodore Roosevelt (1858–1919), and Abraham Lincoln (1809–1865). The memorial park covers 1,278.45 acres (2.00 sq mi; 5.17 km2) and is 5,725 feet (1,745 m) above sea level.

South Dakota historian Doane Robinson is credited with conceiving the idea of carving the likenesses of famous people into the Black Hills region of South Dakota in order to promote tourism in the region. His initial idea was to sculpt the Needles; however, Gutzon Borglum rejected the Needles because of the poor quality of the granite and strong opposition from American Indian groups. They settled on Mount Rushmore, which also has the advantage of facing southeast for maximum sun exposure. Robinson wanted it to feature American West heroes such as Lewis and Clark, Red Cloud, and Buffalo Bill Cody,but Borglum decided that the sculpture should have broader appeal and chose the four presidents.

Senator Peter Norbeck sponsored the project and secured federal funding; construction began in 1927, and the presidents’ faces were completed between 1934 and 1939. Gutzon Borglum died in March 1941, and his son Lincoln took over as leader of the construction project. Each president was originally to be depicted from head to waist, but lack of funding forced construction to end on October 31, 1941.

Mount Rushmore attracts more than two million visitors annually.

History

Originally known to the LakotaSioux as “The Six Grandfathers” (Tunkasila Sakpe) or “Cougar Mountain” (Igmu Tanka Paha), the mountain was renamed after Charles E. Rushmore, a prominent New York lawyer, during an expedition in 1885. At first, the project of carving Rushmore was undertaken to increase tourism in the Black Hills region of South Dakota. After long negotiations involving a Congressional delegation and President Calvin Coolidge, the project received Congressional approval. The carving started in 1927 and ended in 1941 with no fatalities.

As Six Grandfathers, the mountain was part of the route that Lakota leader Black Elk took in a spiritual journey that culminated at Black Elk Peak. Following a series of military campaigns from 1876 to 1878, the United States asserted control over the area, a claim that is still disputed on the basis of the 1868 Treaty of Fort Laramie(see section “Controversy” below). Among American settlers, the peak was known variously as Cougar Mountain, Sugarloaf Mountain, Slaughterhouse Mountain, and Keystone Cliffs. It was named Mount Rushmore during a prospecting expedition by Charles Rushmore, David Swanzey (husband of Carrie Ingalls), and Bill Challis.

Historian Doane Robinson conceived the idea for Mount Rushmore in 1923 to promote tourism in South Dakota. In 1924, Robinson persuaded sculptor Gutzon Borglum to travel to the Black Hills region to ensure the carving could be accomplished. Borglum had been involved in sculpting the Confederate Memorial Carving, a massive bas-relief memorial to Confederate leaders on Stone Mountain in Georgia, but was in disagreement with the officials there.

The original plan was to make the carvings in granite pillars known as the Needles. However, Borglum realized that the eroded Needles were too thin to support sculpting. He chose Mount Rushmore, a grander location, partly because it faced southeast and enjoyed maximum exposure to the sun. Borglum said upon seeing Mount Rushmore, “America will march along that skyline.” Congress authorized the Mount Rushmore National Memorial Commission on March 3, 1925.

Between October 4, 1927, and October 31, 1941, Gutzon Borglum and 400 workers sculpted the colossal 60 foot (18 m) high carvings of U.S. presidentsGeorge Washington, Thomas Jefferson, Theodore Roosevelt, and Abraham Lincoln to represent the first 130 years of American history. These presidents were selected by Borglum because of their role in preserving the Republic and expanding its territory. The carving of Mount Rushmore involved the use of dynamite, followed by the process of “honeycombing”, a process where workers drill holes close together, allowing small pieces to be removed by hand. In total, about 450,000 short tons (410,000 t) of rock were blasted off the mountainside. The image of Thomas Jefferson was originally intended to appear in the area at Washington’s right, but after the work there was begun, the rock was found to be unsuitable, so the work on the Jefferson figure was dynamited, and a new figure was sculpted to Washington’s left.

The Chief Carver of the mountain was Luigi del Bianco, artisan and headstone carver in Port Chester, NY. Del Bianco emigrated to the U.S. from Friuli in Italy, and was chosen to work on this project because of his remarkable skill at etching emotions and personality into his carved portraits.

In 1933, the National Park Service took Mount Rushmore under its jurisdiction. Julian Spotts helped with the project by improving its infrastructure. For example, he had the tram upgraded so it could reach the top of Mount Rushmore for the ease of workers. By July 4, 1934, Washington’s face had been completed and was dedicated. The face of Thomas Jefferson was dedicated in 1936, and the face of Abraham Lincoln was dedicated on September 17, 1937. In 1937, a bill was introduced in Congress to add the head of civil-rights leader Susan B. Anthony, but a rider was passed on an appropriations bill requiring federal funds be used to finish only those heads that had already been started at that time. In 1939, the face of Theodore Roosevelt was dedicated.

The Sculptor’s Studio – a display of unique plaster models and tools related to the sculpting – was built in 1939 under the direction of Borglum. Borglum had planned to make a secret room behind the hairline of Abraham Lincoln which was supposed to be a doorway to a chamber originally intended to hold some of America’s most treasured documents but was left unfinished due to his death. Borglum died from an embolism in March 1941. His son, Lincoln Borglum, continued the project. Originally, it was planned that the figures would be carved from head to waist, but insufficient funding forced the carving to end. Borglum had also planned a massive panel in the shape of the Louisiana Purchasecommemorating in eight-foot-tall gilded letters the Declaration of Independence, U.S. Constitution, Louisiana Purchase, and seven other territorial acquisitions from Alaska to Texas to the Panama Canal Zone. In total, the entire project cost US$989,992.32. Unusually for a project of such size, no workers died during the carving.

Harold Spitznagel and Cecil Doty designed the original visitor center, finished in 1957. These structures were part of the Mission 66 effort to improve visitors’ facilities at national parks and monuments across the country.

On October 15, 1966, Mount Rushmore was listed on the National Register of Historic Places. A 500-word essay giving the history of the United States by Nebraska student William Andrew Burkett was selected as the college-age group winner in a 1934 competition, and that essay was placed on the Entablature on a bronze plate in 1973. In 1991, President George H. W. Bush officially dedicated Mount Rushmore.

In a canyon behind the carved faces is a chamber, cut only 70 feet (21 m) into the rock, containing a vault with sixteen porcelain enamel panels. The panels include the text of the Declaration of Independence and the Constitution, biographies of the four presidents and Borglum, and the history of the U.S. The chamber was created as the entrance-way to a planned “Hall of Records”; the vault was installed in 1998.

Ten years of redevelopment work culminated with the completion of extensive visitor facilities and sidewalks in 1998, such as a Visitor Center, the Lincoln Borglum Museum, and the Presidential Trail. Maintenance of the memorial requires mountain climbers to monitor and seal cracks annually. Due to budget constraints, the memorial is not regularly cleaned to remove lichens. However, on July 8, 2005, Alfred Kärcher GmbH, a German manufacturer of pressure washing and steam cleaning machines, conducted a free cleanup operation which lasted several weeks, using pressurized water at over 200 °F (93 °C).

Please follow and like us:

Leave a Reply

Your email address will not be published. Required fields are marked *